1、加工好的石雕栏杆构件不得有裂缝、隐残、污点、红白线、石铁等缺陷。可用铁锤仔细敲打石雕栏杆构件，如有铛铛作响之声，即有裂缝隐残之石雕栏杆构件；如有喇叭之声，则表明有隐残。
1, well made stone railing members must not have cracks, hidden defects, stains, red and white lines, stone iron and other defects. A hammer may be used to strike the stone carved railings carefully. If there is a clanging sound, the stone carved railings with cracks and mutilations are hidden; if there is a trumpet sound, the stone carved railings are mutilated.
2、石雕栏杆构件走向应符合构件的受力要求，地栿石应为水平走向，柱子、角柱应为垂直走向。石雕栏杆构件品种、质量、加工标准、规格尺寸、标号、色泽应符合设计要求，具有出场合格证和验收报告。
2. The strike of stone carving railings should conform to the stress requirement of the railings, the ground truss should be horizontal, and the columns and corner columns should be vertical. The variety, quality, processing standards, specifications, sizes, labels and colors of the stone carved railings should meet the design requirements, and have the acceptance certificate and acceptance report.
3、检查石雕栏杆榫长是否达到设计要求。若设计无具体要求，一般榫长不小于60mm。
3, check whether the length of the stone railing tenon meets the design requirements. If there is no specific requirement in design, the tenon length should not be less than 60mm.
4、检查楼梯梯段、转角、弧形或其他异型石雕栏杆构件是否根据图纸要求放样下料，异型构件图案的加工及角度控制是否准确。
4. Check whether the staircase steps, corners, arcs or other special-shaped stone carving railings are laid out according to the drawing requirements, and whether the processing and angle control of the special-shaped component patterns are accurate.
5、核对石雕栏杆构件上的编号标记，如编号不齐全、不明显的，应加以补编，以免装错。
5. Check the numbering marks on the stone carving railings, if the numbering is incomplete and not obvious, it should be supplemented to avoid installation errors.